Skid steer loader as a kind of high-efficiency, multi-functional engineering machinery and equipment, its maintenance work is crucial to ensure the long-term stable operation of the equipment. Here are some key maintenance considerations:
Daily Inspection:
After each use, the machine should be thoroughly cleaned to make it easier to detect potential problems.
Check the locomotive for leaks, especially engine oil, coolant and hydraulic fluid levels.
Check tyre pressure and wear to ensure tyres are in good condition.
Check the locomotive, equipment and working devices for wear, damage or missing parts.
Check for debris around the radiator and engine area and make sure these areas are clean.
Regular Maintenance:
Change oil and filters (including air, fuel, and hydraulic filters) regularly to prevent contaminants from entering the system, according to the manufacturer’s recommendations.
Periodically clean or replace hydraulic oil to prevent oil contamination and impurities from clogging oil lines.
Check the tension and wear of the drive belt and chain, and adjust or replace them if necessary.
Check the bearings, pins and lubrication of the travelling mechanism to ensure that the travelling system works properly.
Check the working condition of the generator, starter motor and other electrical components to ensure their normal operation.
Safe Operation:
Before operation, make sure all components are in good condition and free of safety hazards.
Observe operating procedures without overloading, overspeeding, or violating the law.
Wear necessary safety equipment such as safety helmet, protective glasses and dust mask.
Maintain a stable speed and avoid rapid acceleration or braking.
Avoid fatigue driving and arrange the working time reasonably.
Storage environment:
The skid steer loader should be stored in a dry, well-ventilated place with no corrosive gas.
Avoid prolonged exposure to sunlight or humid environment to prevent the machine from moisture or damage.
Training and Emergency Response:
Provide systematic training and education to new employees to ensure that they understand the performance, operation and maintenance procedures of the machine.
In the event of an emergency, such as engine overheating, oil leaks, etc., stop operations immediately and follow the manufacturer’s emergency procedures.
Maintenance Tools and Compliance:
When carrying out repairs and maintenance, ensure that the appropriate tools and spare parts are available and that the manufacturer’s maintenance guidelines are followed.
Ensure that the skid steer loader complies with local laws, regulations and safety standards.
Environmental Awareness:
During use, take care to minimise noise, dust and other environmental impacts and try to operate in an environmentally friendly manner.
Troubleshooting and Documentation:
Understand basic troubleshooting methods and know how to detect and handle common mechanical problems.
Keep records of all repair and maintenance activities and report any suspected problems or malfunctions.
In summary, skid steer loader maintenance requires a combination of several aspects, including routine inspections, regular maintenance, safe operation, storage environment, employee training and emergency response, maintenance tools and compliance, environmental awareness, and troubleshooting and record keeping. By following these precautions, you can ensure the long-term stable operation and efficient operation of skid steer loaders.
